Which Roof Tiles Are The Best? Recommendation For Roof Tiles

Which Roof Tiles Are The Best? Recommendation For Roof Tiles

The question of the right roofing concerns new and old homeowners alike. There are two basic materials that you can use for these in today’s market: roof tiles and roofing stones. Despite their similarity to each other, the two materials have clear differences that you must take into account when making your selection. You can find out here which roof tiles and bricks are recommended.

Effective roofing can withstand wind, weather, sun and other loads for years. You are spoiled for choice as to which type of roofing you use for your new building or renovation. There are two main types to choose from for your roofing: tile and stone.

These in turn are divided into different coatings that have a completely different effect on the roofing and must be compared. If you are about to take this important step yourself, you should take a little time and consider the pros and cons of the two types of roofing.

You can always check our website for more content: blog


stones or bricks?

The question of roof tiles or roof stone has been important since the advent of concrete. Before concrete became popular for roofing, only tiles of various varieties were found on the roofs. Especially with a new building, it is interesting to know which material is recommended for roofing so that you can enjoy it for a long time.

The decision depends on the following points:

  • resilience
  • Weight
  • price
  • Design
different roof coverings

All of these influence the final recommendation as to which of the two materials you should use for the roofing. In the ecological balance, the stones are far superior to the bricks due to their production. About 70 percent of energy is saved if you decide to use roofing tiles, since the mining of clay and the firing use a lot of energy. A comparison is nevertheless necessary for the final decision.

Tip: If you are aware of roof tiles, it is not another form of roofing. The term roof tile describes a special fold design of the roof tiles and tiles and can therefore be made of both materials.

roof tiles

The roof tile is the centuries-old classic of roofing, which is still used today in the same way as in the past. Roof tiles are sheets of clay that are shaped and fired at a temperature of 900°C to 1,200°C. The clay hardens through firing and can then be used as a brick.

It is precisely this process that provides the characteristic color of the tiles and their possible uses as roofing. Due to the manufacturing process, the brick scores particularly well in terms of design. The fired clay is extremely decorative and is still preferred by many people for this reason.

Other advantages of the roof tiles are:

  • available in numerous shapes and colors
  • available in three different surface treatments
  • very easy
  • extremely resistant
  • weatherproof
  • breathable
roof tiles

Advantages and disadvantages

It is precisely the breathability that makes roof tiles the preferred material if you want a good indoor climate in an attic. With roof tiles, there is often an unpleasant build-up of heat, especially if you are on the upper floors. At the same time, the low weight of the tiles means that less material is used for the substructure of the roof. Although you need more wood than with roof tiles, planning and implementation are much easier.

Unfortunately, the tiles have a tendency to be blown off the roof in high winds. Even if these were laid with a perfect fit, the low dead weight means that you have to keep laying new tiles. Roof tiles are better than roof stones for another point. We are talking here about low roof pitches and slim roofs. The fold allows you to lay the tiles with an extremely precise fit, so that they can even be used on difficult roof shapes.

roof tiles

Compared to tiles, roof tiles are not made of clay, but concrete. For this reason, the manufacturing process differs significantly from that of roof tiles, as these are not fired. The roof tiles are manufactured in the following way.

  • Cement, sand and water are mixed
  • the mixture is poured into a mold
  • this is then dried at 60.degree
  • for this they are stored in heating chambers
  • Last but not least, the stones have to harden for about four weeks

Due to this simple production method, the stones are significantly cheaper to buy than roof tiles, depending on the manufacturer by 25 to 35 percent. However, since the production costs for tiles are also becoming cheaper due to modern technology, the cheapest roof tiles are increasingly approaching the price of roof tiles.

The positive properties of the stones include:

  • extremely robust
  • resistant
  • waterproofness
  • good insulation properties
  • effective noise protection
  • are hardly eroded by weather
  • Due to the size, fewer wooden slats are required for the roof substructure

Advantages and disadvantages

Due to the simple manufacturing process, roofing tiles are the choice for you if you are looking for a decorative and inexpensive variant that combines all the advantages of roofing tiles. Above all, the modern coatings enable the stones to be used effectively, as they are very durable compared to the earlier variants and are no longer worn away by weather influences.

Despite the advantages, roof tiles have one major disadvantage: weight. They are significantly heavier than bricks and for this reason there are higher requirements in terms of the load on the roof structure. Good planning of the construction with the acting weight is therefore particularly important.

Tip: If you live in a region with a lot of precipitation, you must check and clean the gutter at regular intervals when using roof tiles. Over the years, debris from the concrete blocks can collect in it, which could lead to the channel becoming clogged.

surface treatment

Another consideration when choosing bricks is the surface treatment. Please note that these only apply to the bricks and not the stones as these do not rely on them due to the concrete. The surface treatment improves the properties of the roof tiles and can thus be better adapted to your needs.

If you have chosen roof tiles up until now, the surface treatments may change your mind. The following treatment methods are used.


A natural clay brick is not further treated after firing. For this reason, these are only available in the well-known shade of red and are 50 to 70 percent cheaper than the glazed and engobed variants. Depending on the provider, you can get them for less than 50 cents each. The biggest disadvantage of natural bricks is the lack of a protective layer against moss, algae and dirt, which quickly makes them unsightly in unfavorable areas. These are particularly well suited in urban areas without large areas of forest or tall trees in the immediate vicinity.

natural red tone of roof tiles


Glazed bricks have one major advantage over the natural variants. Thanks to the glaze, neither moisture nor dirt can settle in the bricks, which means that they remain much more durable. Even green growth and moss is prevented by the glaze, making it ideal for roofs that suffer from a lot of moisture and environmental influences.

A cosmetic disadvantage, however, is the fact that the glazed bricks are permanently shiny and reflect a lot of light, which is not even allowed in some areas, as they can even be dazzling when there is a lot of sun. Depending on the model selected, the glaze looks very elegant at the same time, but it has its price. Glazed bricks are the most expensive of all bricks and can easily cost around €1.50 each.

glazed roof tiles


Like glazed bricks, engobed bricks are resistant to dirt, moss, green growth and moisture. In contrast to a glaze, an engobe burns additional clay onto the brick and thus condenses it. At the same time, it is possible to color it by adding dyes without the surface shining as with glazes. However, some manufacturers offer shiny variants. Engobed bricks are well suited for near-natural areas. In terms of price, they are similar to glazed bricks, but are around ten percent more expensive or cheaper, depending on the manufacturer.

Of these types, the use of engobed bricks is the most recommended, as they are much more versatile than natural and glazed bricks. Above all, the choice of colors should be mentioned here, as you can choose shiny, matt or particularly colorful ones. Although the price is significantly higher compared to the natural roof tiles and roofing stones, if you want to rely on tiles, you should opt for engobed ones.

Recommended manufacturers

A frequently overlooked point when choosing a roofing material is the manufacturer of the bricks and stones. The manufacturer you choose is crucial to the quality of the roofing you choose, especially when it comes to well-established companies that have been in the business for a long time.

These include:

  • Creaton
  • Braas
  • Roof tile works in Nelskamp
  • Erlus
  • Wienerberger
  • Röben

It is recommended that you get your roof tiles and bricks from these companies. Not only the quality of the manufacturer has a positive effect on your roofing, maintenance is cheaper in the long run and associated with fewer problems. As it is rare nowadays for complete roofs to be re-covered, apart from in the case of new construction or renovation, a reliable and established manufacturer is always preferable.

In this way, you can purchase suitable bricks and stones in an emergency, which are also of high quality. If you choose one of the recommended manufacturers, you should also pay attention to the order quantity.

1. Choose preferred models that have been on the market for a long time and are therefore always available. Modern variants in particular are often only available for a short time or quickly suffer from supply bottlenecks. You don’t have to worry about this with the “classics” of the individual manufacturers.

2. If you have a specific model in mind that is not part of the permanent offer, you should order significantly more and store the excess stones and bricks. This way you always have a small amount of the tiles available when you need to repair the roofing.

Note the amount of material on the roof tiles

With the help of these tips, you can easily select the right roof tiles or tiles. Of course, you can use the models from unknown manufacturers that deliver high quality. However, for a long time it is advisable to give preference to well-known manufacturers in order to guarantee the durability of the roofing.

As you have already realized, the final decision is left to your taste and budget. The materials do not give much in terms of effectiveness and for this reason it is only advisable to choose appropriately high-quality bricks or stones.

Tip: When choosing the roof tiles and stones, be sure to observe the development plan (B-plan) of your region or municipality in order to avoid possible problems with the neighbors or the building authority. The B plan regulates points such as the colour, shape and coating of the roof covering and must be observed.